If you are unsure which product is best suited to your requirements, you can contact us directly for expert guidance. Share details such as your use case, environment, compatibility needs, and budget, and we will help you select the most appropriate solution.
Teltonika RUTX11 Industrial Cellular Router
This powerful LTE Cat 6 cellular router is designed for professional applications requiring reliable, fast connection and high data throughput. The RUTX11 is equipped with four Gigabit Ethernet ports, AC Wi-Fi, Bluetooth LE, and is EN 45545-2-certified, making it approved for use in passenger trains across Europe.
RUTX11 Features
- Cellular speeds up to 300Mbps with Carrier Aggregation
- With auto failover, backup WAN and other switching scenarios
- Wave-2 802.11ac Dual Band Wi-Fi and Bluetooth LE
- 4 x Gigabit Ethernet ports with up to 128 port/tag-based VLANs supported
Request a Quote
Product Type
Manufacturer
Country Of Manufacture
Lithuania
Mobile module
4G LTE Cat 6 up to 300 DL/ 50 UL Mbps; 3G up to 42 DL/ 5.76 UL Mbps
3GPP Release
Release 12
SIM switch
2 SIM cards, auto-switch cases: weak signal, data limit, SMS limit, roaming, no network, network denied, data connection fail, SIM idle protection
Status
IMSI, ICCID, operator, operator state, data connection state, network type, CA indicator, bandwidth, connected band, signal strength (RSSI), SINR, RSRP, RSRQ, EC/IO, RSCP, data sent/received, LAC, TAC, cell ID, ARFCN, UARFCN, EARFCN, MCC, and MNC
SMS
SMS status, SMS configuration, send/read SMS via HTTP POST/GET, EMAIL to SMS, SMS to EMAIL, SMS to HTTP, SMS to SMS, scheduled SMS, SMS autoreply, SMPP
USSD
Supports sending and reading Unstructured Supplementary Service Data messages
Black/White list
Operator black/white list (by country or separate operators)
Multiple PDN
Possibility to use different PDNs for multiple network access and services
Band management
Band lock, Used band status display
SIM idle protection service
When working with devices with two SIM slots, the one not currently in use will remain idle until the device switches to it, meaning that no data is used on the card until then
SIM PIN code management
SIM PIN code management enables setting, changing, or disabling the SIM card's PIN
APN
Auto APN
Bridge
Direct connection (bridge) between mobile ISP and device on LAN
Passthrough
Router assigns its mobile WAN IP address to another device on LAN
Wireless mode
802.11b/g/n/ac Wave 2 (Wi-Fi 5) with data transmission rates up to 867 Mbps (Dual Band, MU-MIMO), 802.11r fast transition, Access Point (AP), Station (STA)
Wi-Fi security
WPA2-Enterprise - PEAP, WPA2-PSK, WPA-EAP, WPA-PSK, WPA3-SAE, WPA3-EAP, OWE; AES-CCMP, TKIP, Auto-cipher modes, client separation, EAP-TLS with PKCS#12 certificates, disable auto-reconnect
SSID/ESSID
ESSID stealth mode
Wi-Fi users
Up to 150 simultaneous connections
Wireless Connectivity Features
Wireless mesh (802.11s), fast roaming (802.11r), Relayd, BSS transition management (802.11v), radio resource measurement (802.11k)
Wireless MAC filter
Whitelist, blacklist
Wireless QR code generator
Once scanned, a user will automatically enter your network without needing to input login information.
Bluetooth 4.0
Bluetooth low energy (LE) for short range communication
WAN
1 x WAN port 10/100/1000 Mbps, compliance with IEEE 802.3, IEEE 802.3u, 802.3az standards, supports auto MDI/MDIX crossover
LAN
3 x LAN ports, 10/100/1000 Mbps, compliance with IEEE 802.3, IEEE 802.3u, 802.3az standards, supports auto MDI/MDIX crossover
Routing
Static routing, Dynamic routing (BGP, OSPF v2, RIP v1/v2, EIGRP, NHRP), Policy based routing
Network protocols
TCP, UDP, IPv4, IPv6, ICMP, NTP, DNS, HTTP, HTTPS, SFTP, FTP, SMTP, SSL/TLS, ARP, VRRP, PPP, PPPoE, UPNP, SSH, DHCP, Telnet, SMPP, SNMP, MQTT, Wake On Lan (WOL)
VoIP passthrough support
H.323 and SIP-alg protocol NAT helpers, allowing proper routing of VoIP packets
Connection monitoring
Ping Reboot, Wget Reboot, Periodic Reboot, LCP and ICMP for link inspection
Firewall
Port forward, traffic rules, custom rules
Firewall status page
View all your Firewall statistics, rules, and rule counters
Ports management
View device ports, enable and disable each of them, turn auto-configuration on or off, change their transmission speed, and so on
Network topology
Visual representation of your network, showing which devices are connected to which other devices
Hotspot
Captive portal (hotspot), internal/external Radius server, Radius MAC authentication, SMS authorisation, SSO authentication, internal/external landing page, walled garden, user scripts, URL parameters, user groups, individual user or group limitations, user management, 9 default customisable themes and optionality to upload and download customised hotspot themes
DHCP
Static and dynamic IP allocation, DHCP relay, DHCP server configuration, status, static leases: MAC with wildcards
QoS / Smart Queue Management (SQM)
Traffic priority queuing by source/destination, service, protocol or port, WMM, 802.11e
DDNS
Supported >25 service providers, others can be configured manually
DNS over HTTPS
DNS over HTTPS proxy enables secure DNS resolution by routing DNS queries over HTTPS
Network backup
Wi-Fi WAN, Mobile, VRRP, Wired options, each of which can be used as an automatic Failover
Load balancing
Balance Internet traffic over multiple WAN connections
SSHFS
Possibility to mount remote file system via SSH protocol
VRF support
Initial virtual routing and forwarding (VRF) support
802.1x
Port-based network access control client
Authentication
Pre-shared key, digital certificates, X.509 certificates, TACACS+, Internal & External RADIUS users authentication, IP & login attempts block, time-based login blocking, built-in random password generator
Firewall
Pre-configured firewall rules can be enabled via WebUI, unlimited firewall configuration via CLI; DMZ; NAT; NAT-T
Attack prevention
DDOS prevention (SYN flood protection, SSH attack prevention, HTTP/HTTPS attack prevention), port scan prevention (SYN-FIN, SYN-RST, X-mas, NULL flags, FIN scan attacks)
VLAN
Port and tag-based VLAN separation
Mobile quota control
Mobile data limit, customizable period, start time, warning limit, phone number
WEB filter
Blacklist for blocking out unwanted websites, Whitelist for specifying allowed sites only
Access control
Flexible access control of SSH, Web interface, CLI and Telnet
SSL certificate generation
Let's encrypt support
OpenVPN
OpenVPN Encryption
IPsec
Multiple clients and a server can run simultaneously, 27 encryption methods
GRE
DES-CBC 64, RC2-CBC 128, DES-EDE-CBC 128, DES-EDE3-CBC 192, DESX-CBC 192, BF-CBC 128, RC2-40-CBC 40, CAST5-CBC 128, RC2-64-CBC 64, AES-128-CBC 128, AES-128-CFB 128, AES-128-CFB1 128, AES-128-CFB8 128, AES-128-OFB 128, AES-128-GCM 128, AES-192-CFB 192, AES-192-CFB1 192, AES-192-CFB8 192, AES-192-OFB 192, AES-192-CBC 192, AES-192-GCM 192, AES-256-GCM 256, AES-256-CFB 256, AES-256-CFB1 256, AES-256-CFB8 256, AES-256-OFB 256, AES-256-CBC 256
PPTP, L2TP
XFRM, IKEv1, IKEv2, with 14 encryption methods for IPsec (3DES, DES, AES128, AES192, AES256, AES128GCM8, AES192GCM8, AES256GCM8, AES128GCM12, AES192GCM12, AES256GCM12, AES128GCM16, AES192GCM16, AES256GCM16)
Stunnel
GRE tunnel, GRE tunnel over IPsec support
DMVPN
Client/Server instances can run simultaneously, L2TPv3, L2TP over IPsec support
SSTP
Proxy designed to add TLS encryption functionality to existing clients and servers without any changes in the program’s code
ZeroTier
Method of building scalable IPsec VPNs
WireGuard
SSTP client instance support
Tinc
ZeroTier VPN client support
Tailscale
WireGuard VPN client and server support
Supported modes
Tinc offers encryption, authentication and compression in it's tunnels. Client and server support.
Supported connection types
Tailscale offers speed, stability, and simplicity over traditional VPNs. Encrypted point-to-point connections using the open source WireGuard protocol
Supported modes
Client, Server
Supported connection types
TCP
Custom registers
Server, Client
Supported data formats
TCP, USB
Protocol
MODBUS TCP custom register block requests, which read/write to a file inside the router, and can be used to extend MODBUS TCP Client functionality
Data to server
8-bit: INT, UINT; 16-bit: INT, UINT (MSB or LSB first); 32-bit: float, INT, UINT (ABCD (big-endian), DCBA (little-endian), CDAB, BADC), HEX, ASCII
Modbus MQTT Gateway
HTTP(S), MQTT, Azure MQTT, Kinesis
Supported modes
Extract parameters from multiple sources and different protocols, and send them all to a single server; Custom LUA scripting, allowing scripts to utilize the router's Data to server feature
Supported connection
Allows sending commands and receiving data from MODBUS Server through MQTT broker
DLMS Support
Station, Outstation
Supported modes
TCP, USB
Supported connection types
DLMS - standard protocol for utility meter data exchange
Teltonika Networks Web API (beta) support
Client
WEB UI
TCP, USB
FOTA
Expand your device's possibilities by using a set of configurable API endpoints to retrieve or change data. For more information, please refer to this documentation: https://developers.teltonika-networks.com
SSH
HTTP/HTTPS, status, configuration, FW update, CLI, troubleshoot, multiple event log servers, firmware update availability notifications, event log, system log, kernel log, Internet status
SMS
Firmware update from server, automatic notification
Call
SSH (v1, v2)
TR-069
SMS status, SMS configuration, send/read SMS via HTTP POST/GET
MQTT
Reboot, Status, Mobile data on/off, Output on/off, answer/hang-up with a timer, Wi-Fi on/off
SNMP
OpenACS, EasyCwmp, ACSLite, tGem, LibreACS, GenieACS, FreeACS, LibCWMP, Friendly tech, AVSystem
JSON-RPC
MQTT Broker, MQTT publisher
RMS
SNMP (v1, v2, v3), SNMP Trap, Brute force protection
ThingWorx
Management API over HTTP/HTTPS
Cumulocity - Cloud of Things
Teltonika Remote Management System (RMS)
Azure IoT Hub
Allows monitoring of: WAN Type, WAN IP, Mobile Operator Name, Mobile Signal Strength, Mobile Network Type
CPU
Allows monitoring of: Device Model, Revision and Serial Number, WAN Type and IP, Mobile Cell ID, ICCID, IMEI, Connection Type, Operator, Signal Strength. Has reboot and firmware upgrade actions.
RAM
Can be configured with Data to Server to send all the available parameters to the cloud. Has Direct method support which allows to execute RutOS API calls on the IoT Hub. Also has Plug and Play integration with Device Provisioning Service that allows zero-touch device provisioning to IoT Hubs
FLASH storage
Quad-core ARM Cortex A7, 717 MHz
WEB UI
256 MB, DDR3
FOTA
256 MB, SPI Flash
RMS
Update FW from file, check FW on server, configuration profiles, configuration backup
Keep settings
Update FW
Factory settings reset
Update FW/configuration for multiple devices at once
Operating system
Update FW without losing current configuration
Supported languages
A full factory reset restores all system settings, including the IP address, PIN, and user data to the default manufacturer's configuration
Development tools
RutOS (OpenWrt based Linux OS)
GPL customization
Busybox shell, Lua, C, C++, and Python, Java in Package manager
Package Manager
SDK package with build environment provided
GNSS
You can create your own custom, branded firmware and web page application by changing colours, logos, and other elements in our firmware to fit your or your clients’ needs
Coordinates
The Package Manager is a service used to install additional software on the device
NMEA
GPS, GLONASS, BeiDou, Galileo and QZSS
NTRIP
GNSS coordinates via WebUI, SMS, TAVL, RMS
Server software
NMEA 0183
Geofencing
NTRIP protocol (Networked Transport of RTCM via Internet Protocol)
Data rate
Supported server software TAVL, RMS
Applications
Configurable multiple geofence zones
External devices
USB 2.0
Storage formats
Samba share, USB-to-serial
Input
Possibility to connect external HDD, flash drive, additional modem, printer, USB-serial adapter
Output
FAT, FAT32, exFAT, NTFS (read-only), ext2, ext3, ext4
Events
1 x Digital Input, 0 - 6 V detected as logic low, 8 - 30 V detected as logic high
I/O juggler
1 x Digital Output, Open collector output, max output 30 V, 300 mA
Connector
Email, RMS, SMS
Input voltage range
Allows to set certain I/O conditions to initiate event
PoE (passive)
4-pin industrial DC power socket
Power consumption
9 - 50 VDC, reverse polarity protection, voltage surge/transient protection24 - 36 VDC for railway version of the code RUTX11 020G00
Ethernet
Possibility to power up through LAN1 port, not compatible with IEEE802.3af, 802.3at and 802.3bt standards, Mode B, 9 - 50 VDC
I/O’s
16 W Max
Status LEDs
4 x RJ45 ports, 10/100/1000 Mbps
SIM
1 x Digital Input, 1 x Digital Output on 4-pin power connector
Power
4 x WAN type LEDs, 2 x Mobile connection type, 5 x Mobile connection strength, 8 x LAN status, 1 x Power, 2 x 2.4G and 5G Wi-Fi
Antennas
2 x SIM slots (Mini SIM - 2FF), 1.8 V/3 V, external SIM holders
USB
1 x 4-pin power connector
Reset
2 x SMA for Mobile, 2 x RP-SMA for Wi-Fi, 1 x RP-SMA for Bluetooth, 1 x SMA for GNSS
Other
1 x USB A port for external devices
Casing material
Reboot/User default reset/Factory reset button
Dimensions (W x H x D)
1 x Grounding screw
Weight
Aluminium housing
Mounting options
115 x 44.2 x 95.1 mm
Operating temperature
456 g
Operating humidity
DIN rail, wall mount, flat surface (all require additional kit)
Ingress Protection Rating
-40 °C to 75 °C
Regulatory
10% to 90% non-condensing
Operator
IP30
Vehicle
CE, UKCA, EAC, UCRF, CITC, ICASA, ANRT, FCC, IC, PTCRB, RCM, IMDA, SIRIM, NTC, E-mark, Railway, UL/CSA Safety, CB
Standards
AT&T, Verizon, T-Mobile, Deutsche Telekom AG
ESD
ECE R10 (E-mark)
Radiated Immunity
EN 55032:2015 + A11:2020EN 55035:2017 + A11:2020EN 301 489-1 V2.2.3Draft EN 301 489-3 V2.1.2EN 301 489-17 V3.2.4Draft EN 301 489-19 V2.2.0EN 301 489-52 V1.2.1
EFT
EN 61000-4-2:2009
Surge Immunity (AC Mains Power Port)
EN IEC 61000-4-3:2006 + A1:2008 + A2:2010
Surge immunity (AC Power Line)
EN 61000-4-4:2012
CS
EN 61000-4-5:2014 + A1:2017
DIP
EN 61000-4-5:2014 + A1:2017
Standards
EN 61000-4-6:2014
Standards
EN 61000-4-11:2004
The Teltonika RUTX11 Industrial Cellular Router is designed to meet the demands of various markets that require rugged, reliable products. Below are some of the key industries where the RUTX11 is commonly used:
Aerospace, Marine and Offshore, Medical and Healthcare, Military and Defence, Outdoor and Mobile Computing, Public Safety and Emergency Services, Transport and Logistics
These examples highlight the versatility of the Teltonika RUTX11 Industrial Cellular Router across a range of market applications, with its potential extending far beyond the sectors listed here. For more information or to assess if this Cellular Router, Rugged Router fits your specific needs, please contact us.
The Teltonika RUTX11 Industrial Cellular Router comes with a 24 Month Limited Warrany against defects in workmanship and materials, effective from the date of shipment (unless otherwise agreed in writing).
To receive service under this warranty, the eligible product, Teltonika RUTX11 Industrial Cellular Router, must be presented to RUGGED in the United Kingdom.
For more information about the Teltonika RUTX11 Industrial Cellular Router or to arrange repairs and services not covered by the warranty, please visit the warranty section on our website.
Do you need further details about the Teltonika RUTX11 Industrial Cellular Router or require a custom solution or demonstration?
At FB Peripherals, we recognise that every project has its own unique demands. If you have any questions about the Teltonika RUTX11 or need a custom Cellular Router solution designed specifically for you, our team of technical experts are ready to assist you.
Alternative Products
Discover a range of alternatives that offer comparable features and quality to the product you’re viewing.
Our selection of similar items provides diverse options, allowing you to explore different designs, functionalities, and styles tailored to your preferences. Each product has been carefully chosen to ensure it meets the high standards you expect, enabling you to make a well-informed decision based on your unique requirements.
Browse through our related products and find the perfect match that complements your choice seamlessly.
Having trouble finding what you're looking for?
Selecting the right product for your specific application and environment can be quite challenging. At Rugged, our team of experts is on hand to assist you in making the best choice. Whether you have questions about product specifications or require guidance through our range of solutions, we’re here to help.
With our extensive industry knowledge and commitment to quality, we can ensure you find the ideal solution tailored to your needs.
Frequently Asked Questions
FB Peripherals offers free technical support for the lifetime of products you purchase. This includes help with setup, troubleshooting, and integration. Support is available online or directly from the technical team
Yes, modern cellular routers support 5G technology, offering significantly enhanced speed, lower latency, and improved reliability compared to previous generations. These 5G cellular routers are designed to meet the demands of rugged and mission-critical environments, ensuring seamless connectivity even in harsh conditions. For industrial and outdoor applications requiring robust, high-performance networking, 5G cellular routers provide an ideal solution. FB Peripherals specialises in supplying rugged routers built to withstand challenging environments, making them a trusted source for advanced 5G cellular router technology. Learn more about our range of rugged routers designed for 5G connectivity.
Cellular routers, especially those designed for industrial and mission-critical applications, offer robust security features to protect data transmission over mobile networks. These devices typically include advanced encryption protocols, VPN support, firewall capabilities, and secure authentication methods to prevent unauthorised access. Choosing a rugged, secure cellular router from a trusted supplier like FB Peripherals ensures enhanced reliability and protection in harsh environments. Proper configuration and regular firmware updates are essential to maintaining optimal security in cellular networking solutions.
A cellular router is primarily used to provide secure, reliable internet connectivity in environments where wired connections are impractical or unavailable. It enables remote access, data transmission, and network connectivity over cellular networks, making it ideal for mission-critical applications, including industrial automation, transportation, and remote monitoring. Cellular routers are essential in harsh environments due to their rugged design, ensuring consistent performance in challenging conditions. For durable, high-performance options, FB Peripherals offers a range of rugged routers tailored to meet demanding cellular router applications efficiently.
A cellular broadband router can effectively replace fixed broadband in many applications, particularly where flexibility or remote access is crucial. Cellular routers provide reliable, high-speed internet by connecting to mobile networks, making them ideal for locations without fixed-line infrastructure or as a failover solution. Rugged industrial cellular routers from trusted suppliers like FB Peripherals are designed for harsh environments, ensuring continuous connectivity in mission-critical settings. However, for heavy bandwidth demands or highly stable connections, fixed broadband might still be preferable. Ultimately, the choice depends on specific operational needs and environmental conditions.
Yes, multi-device cellular routers are specifically designed to support multiple devices simultaneously, making them ideal for industrial and mission-critical applications. These routers provide robust, secure connectivity to several endpoints via cellular networks, ensuring reliable data transmission even in harsh environments. FB Peripherals offers a range of rugged multi-device cellular routers engineered for scalability and durability. Their solutions support seamless integration and maintain high performance across multiple connected devices. For reliable, industrial-grade connectivity, explore the options available from FB Peripherals at rugged routers.
Yes, cellular routers require a SIM card to connect to mobile networks. The SIM card enables the router to authenticate and access the cellular data service, much like in a mobile phone. This is essential for reliable internet connectivity, especially in remote or harsh environments where wired connections are impractical. For mission-critical applications, using rugged cellular routers with SIM card support ensures robust and secure communication. FB Peripherals offers a range of rugged routers designed to operate reliably under challenging conditions, providing seamless cellular network access via SIM cards.
Cellular router reliability depends on factors such as network coverage, router quality, and environmental conditions. High-quality cellular routers, especially rugged models designed for industrial use, offer robust connections with minimal downtime, even in harsh conditions. They provide failover capabilities, automatic reconnection, and support for multiple carriers to enhance reliability. For mission-critical applications, choosing a reliable rugged cellular router from a trusted supplier like FB Peripherals ensures consistent performance and stable connectivity in demanding environments.
Cellular routers are widely used across various industries requiring reliable, remote connectivity in harsh or mission-critical environments. Key sectors include oil and gas, transportation, utilities, manufacturing, and emergency services. These industries rely on cellular routers for real-time data transfer, remote monitoring, and secure communication. Rugged cellular routers are essential where wired networks are impractical or unavailable, ensuring uninterrupted operation in extreme conditions. For robust and industrial-grade solutions, FB Peripherals is a trusted supplier, offering specialised devices designed to meet demanding requirements across multiple sectors. Explore their range of rugged routers for reliable connectivity.