If you are unsure which product is best suited to your requirements, you can contact us directly for expert guidance. Share details such as your use case, environment, compatibility needs, and budget, and we will help you select the most appropriate solution.
Teltonika RUTX14 4G LTE Cat12 Industrial Cellular Router
RUTX14 is the fastest single modem LTE-A Cat 12 router in the Teltonika Networks product range. With two SIM cards, Wave-2 dual-band Wi-Fi, five Gigabit Ethernet ports, and automatic failover, you may expect high compatibility, unbeatable network resilience, and exceptional speed.
RUTX14 Features
- Download up to 600 Mbps. Upload up to 150 Mbps
- With auto failover, backup WAN and other switching scenarios
- Wave-2 802.11ac Dual Band Wi-Fi and Bluetooth LE
- 5 x Gigabit Ethernet ports with up to 128 port/tag-based VLANs supported
Request a Quote
Product Type
Manufacturer
Country Of Manufacture
Lithuania
Mobile module
4G LTE Cat 12 up to 600 DL/150 UL Mbps; 3G to to 42 DL/ 11.2 UL Mbps
3GPP Release
Release 12
SIM switch
2 SIM cards, auto-switch cases: weak signal, data limit, SMS limit, roaming, no network, network denied, data connection fail, SIM idle protection
Status
IMSI, ICCID, operator, operator state, data connection state, network type, CA indicator, bandwidth, connected band, signal strength (RSSI), SINR, RSRP, RSRQ, EC/IO, RSCP, data sent/received, LAC, TAC, cell ID, ARFCN, UARFCN, EARFCN, MCC, and MNC
SMS
SMS status, SMS configuration, send/read SMS via HTTP POST/GET, EMAIL to SMS, SMS to EMAIL, SMS to HTTP, SMS to SMS, scheduled SMS, SMS autoreply, SMPP
USSD
Supports sending and reading Unstructured Supplementary Service Data messages
Black/White list
Operator black/white list (by country or separate operators)
Multiple PDN
Possibility to use different PDNs for multiple network access and services
Band management
Band lock, Used band status display
SIM idle protection service
When working with devices with two SIM slots, the one not currently in use will remain idle until the device switches to it, meaning that no data is used on the card until then
SIM PIN code management
SIM PIN code management enables setting, changing, or disabling the SIM card's PIN
APN
Auto APN
Bridge
Direct connection (bridge) between mobile ISP and device on LAN
Passthrough
Router assigns its mobile WAN IP address to another device on LAN
Wireless mode
802.11b/g/n/ac Wave 2 (Wi-Fi 5) with data transmission rates up to 867 Mbps (Dual Band, MU-MIMO), 802.11r fast transition, Access Point (AP), Station (STA)
Wi-Fi security
WPA2-Enterprise - PEAP, WPA2-PSK, WPA-EAP, WPA-PSK, WPA3-SAE, WPA3-EAP, OWE; AES-CCMP, TKIP, Auto-cipher modes, client separation, EAP-TLS with PKCS#12 certificates, disable auto-reconnect
SSID/ESSID
ESSID stealth mode
Wi-Fi users
Up to 150 simultaneous connections
Wireless Connectivity Features
Wireless mesh (802.11s), fast roaming (802.11r), Relayd, BSS transition management (802.11v), radio resource measurement (802.11k)
Wireless MAC filter
Whitelist, blacklist
Wireless QR code generator
Once scanned, a user will automatically enter your network without needing to input login information.
Bluetooth 4.0
Bluetooth low energy (LE) for short range communication
WAN
1 x WAN port 10/100/1000 Mbps, compliance with IEEE 802.3, IEEE 802.3u, 802.3az standards, supports auto MDI/MDIX crossover
LAN
4 x LAN ports, 10/100/1000 Mbps, compliance with IEEE 802.3, IEEE 802.3u, 802.3az standards, supports auto MDI/MDIX crossover
Routing
Static routing, Dynamic routing (BGP, OSPF v2, RIP v1/v2, EIGRP, NHRP), Policy based routing
Network protocols
TCP, UDP, IPv4, IPv6, ICMP, NTP, DNS, HTTP, HTTPS, SFTP, FTP, SMTP, SSL/TLS, ARP, VRRP, PPP, PPPoE, UPNP, SSH, DHCP, Telnet, SMPP, SNMP, MQTT, Wake On Lan (WOL)
VoIP passthrough support
H.323 and SIP-alg protocol NAT helpers, allowing proper routing of VoIP packets
Connection monitoring
Ping Reboot, Wget Reboot, Periodic Reboot, LCP and ICMP for link inspection
Firewall
Port forward, traffic rules, custom rules
Firewall status page
View all your Firewall statistics, rules, and rule counters
Ports management
View device ports, enable and disable each of them, turn auto-configuration on or off, change their transmission speed, and so on
Network topology
Visual representation of your network, showing which devices are connected to which other devices
Hotspot
Captive portal (hotspot), internal/external Radius server, Radius MAC authentication, SMS authorisation, SSO authentication, internal/external landing page, walled garden, user scripts, URL parameters, user groups, individual user or group limitations, user management, 9 default customisable themes and optionality to upload and download customised hotspot themes
DHCP
Static and dynamic IP allocation, DHCP relay, DHCP server configuration, status, static leases: MAC with wildcards
QoS / Smart Queue Management (SQM)
Traffic priority queuing by source/destination, service, protocol or port, WMM, 802.11e
DDNS
Supported >25 service providers, others can be configured manually
DNS over HTTPS
DNS over HTTPS proxy enables secure DNS resolution by routing DNS queries over HTTPS
Network backup
Wi-Fi WAN, Mobile, VRRP, Wired options, each of which can be used as an automatic Failover
Load balancing
Balance Internet traffic over multiple WAN connections
SSHFS
Possibility to mount remote file system via SSH protocol
VRF support
Initial virtual routing and forwarding (VRF) support
802.1x
Port-based network access control client
Authentication
Pre-shared key, digital certificates, X.509 certificates, TACACS+, Internal & External RADIUS users authentication, IP & login attempts block, time-based login blocking, built-in random password generator
Firewall
Pre-configured firewall rules can be enabled via WebUI, unlimited firewall configuration via CLI; DMZ; NAT; NAT-T
Attack prevention
DDOS prevention (SYN flood protection, SSH attack prevention, HTTP/HTTPS attack prevention), port scan prevention (SYN-FIN, SYN-RST, X-mas, NULL flags, FIN scan attacks)
VLAN
Port and tag-based VLAN separation
Mobile quota control
Mobile data limit, customizable period, start time, warning limit, phone number
WEB filter
Blacklist for blocking out unwanted websites, Whitelist for specifying allowed sites only
Access control
Flexible access control of SSH, Web interface, CLI and Telnet
SSL certificate generation
Let's encrypt support
OpenVPN
OpenVPN Encryption
Multiple clients and a server can run simultaneously, 27 encryption methods
IPsec
DES-CBC 64, RC2-CBC 128, DES-EDE-CBC 128, DES-EDE3-CBC 192, DESX-CBC 192, BF-CBC 128, RC2-40-CBC 40, CAST5-CBC 128, RC2-64-CBC 64, AES-128-CBC 128, AES-128-CFB 128, AES-128-CFB1 128, AES-128-CFB8 128, AES-128-OFB 128, AES-128-GCM 128, AES-192-CFB 192, AES-192-CFB1 192, AES-192-CFB8 192, AES-192-OFB 192, AES-192-CBC 192, AES-192-GCM 192, AES-256-GCM 256, AES-256-CFB 256, AES-256-CFB1 256, AES-256-CFB8 256, AES-256-OFB 256, AES-256-CBC 256
GRE
XFRM, IKEv1, IKEv2, with 14 encryption methods for IPsec (3DES, DES, AES128, AES192, AES256, AES128GCM8, AES192GCM8, AES256GCM8, AES128GCM12, AES192GCM12, AES256GCM12, AES128GCM16, AES192GCM16, AES256GCM16)
PPTP, L2TP
GRE tunnel, GRE tunnel over IPsec support
Stunnel
Client/Server instances can run simultaneously, L2TPv3, L2TP over IPsec support
DMVPN
Proxy designed to add TLS encryption functionality to existing clients and servers without any changes in the program’s code
SSTP
Method of building scalable IPsec VPNs
ZeroTier
SSTP client instance support
WireGuard
ZeroTier VPN client support
Tinc
WireGuard VPN client and server support
Tailscale
Tinc offers encryption, authentication and compression in it's tunnels. Client and server support.
Supported modes
Tailscale offers speed, stability, and simplicity over traditional VPNs. Encrypted point-to-point connections using the open source WireGuard protocol
Supported connection types
Client, Server
Supported modes
TCP
Supported connection types
Server, Client
Custom registers
TCP, USB
Supported data formats
MODBUS TCP custom register block requests, which read/write to a file inside the router, and can be used to extend MODBUS TCP Client functionality
Protocol
8-bit: INT, UINT; 16-bit: INT, UINT (MSB or LSB first); 32-bit: float, INT, UINT (ABCD (big-endian), DCBA (little-endian), CDAB, BADC), HEX, ASCII
Data to server
HTTP(S), MQTT, Azure MQTT, Kinesis
Modbus MQTT Gateway
Extract parameters from multiple sources and different protocols, and send them all to a single server; Custom LUA scripting, allowing scripts to utilize the router's Data to server feature
Supported modes
Allows sending commands and receiving data from MODBUS Server through MQTT broker
Supported connection
Station, Outstation
DLMS Support
TCP, USB
Supported modes
DLMS - standard protocol for utility meter data exchange
Supported connection types
Client
Teltonika Networks Web API (beta) support
TCP, USB
WEB UI
Expand your device's possibilities by using a set of configurable API endpoints to retrieve or change data. For more information, please refer to this documentation: https://developers.teltonika-networks.com
FOTA
HTTP/HTTPS, status, configuration, FW update, CLI, troubleshoot, multiple event log servers, firmware update availability notifications, event log, system log, kernel log, Internet status
SSH
Firmware update from server, automatic notification
SMS
SSH (v1, v2)
Call
SMS status, SMS configuration, send/read SMS via HTTP POST/GET
TR-069
Reboot, Status, Mobile data on/off, Output on/off, answer/hang-up with a timer, Wi-Fi on/off
MQTT
OpenACS, EasyCwmp, ACSLite, tGem, LibreACS, GenieACS, FreeACS, LibCWMP, Friendly tech, AVSystem
SNMP
MQTT Broker, MQTT publisher
JSON-RPC
SNMP (v1, v2, v3), SNMP Trap, Brute force protection
RMS
Management API over HTTP/HTTPS
ThingWorx
Teltonika Remote Management System (RMS)
Cumulocity - Cloud of Things
Allows monitoring of: WAN Type, WAN IP, Mobile Operator Name, Mobile Signal Strength, Mobile Network Type
Azure IoT Hub
Allows monitoring of: Device Model, Revision and Serial Number, WAN Type and IP, Mobile Cell ID, ICCID, IMEI, Connection Type, Operator, Signal Strength. Has reboot and firmware upgrade actions.
CPU
Can be configured with Data to Server to send all the available parameters to the cloud. Has Direct method support which allows to execute RutOS API calls on the IoT Hub. Also has Plug and Play integration with Device Provisioning Service that allows zero-touch device provisioning to IoT Hubs
RAM
Quad-core ARM Cortex A7, 717 MHz
FLASH storage
256 MB, DDR3
WEB UI
256 MB, SPI Flash
FOTA
Update FW from file, check FW on server, configuration profiles, configuration backup
RMS
Update FW
Keep settings
Update FW/configuration for multiple devices at once
Factory settings reset
Update FW without losing current configuration
Operating system
A full factory reset restores all system settings, including the IP address, PIN, and user data to the default manufacturer's configuration
Supported languages
RutOS (OpenWrt based Linux OS)
Development tools
Busybox shell, Lua, C, C++, and Python, Java in Package manager
GPL customization
SDK package with build environment provided
Package Manager
You can create your own custom, branded firmware and web page application by changing colours, logos, and other elements in our firmware to fit your or your clients’ needs
GNSS
The Package Manager is a service used to install additional software on the device
Coordinates
GPS, GLONASS, BeiDou, Galileo and QZSS
NMEA
GNSS coordinates via WebUI, SMS, TAVL, RMS
NTRIP
NMEA 0183
Server software
NTRIP protocol (Networked Transport of RTCM via Internet Protocol)
Geofencing
Supported server software TAVL, RMS
Data rate
Configurable multiple geofence zones
Applications
USB 2.0
External devices
Samba share, USB-to-serial
Storage formats
Possibility to connect external HDD, flash drive, additional modem, printer, USB-serial adapter
Input
FAT, FAT32, exFAT, NTFS (read-only), ext2, ext3, ext4
Output
1 x Digital Input, 0 - 6 V detected as logic low, 8 - 30 V detected as logic high
Events
1 x Digital Output, Open collector output, max output 30 V, 300 mA
I/O juggler
Email, RMS, SMS
Connector
Allows to set certain I/O conditions to initiate event
Input voltage range
4-pin industrial DC power socket
PoE (passive)
9 - 50 VDC, reverse polarity protection, voltage surge/transient protection
Power consumption
Possibility to power up through LAN1 port, not compatible with IEEE802.3af, 802.3at and 802.3bt standards, Mode B, 9 - 50 VDC
Ethernet
Idle: < 4 W, Max: < 22 W
I/O’s
5 x RJ45 ports, 10/100/1000 Mbps
Status LEDs
1 x Digital Input, 1 x Digital Output on 4-pin power connector
SIM
2 x connection status LEDs, 3 x connection strength LEDs, 10 x Ethernet port status LEDs, 4 x WAN status LEDs, 1 x Power LED, 2 x 2.4G and 5G Wi-Fi LEDs
Power
2 x SIM slots (Mini SIM - 2FF), 1.8 V/3 V, external SIM holders
Antennas
1 x 4-pin power connector
USB
4 x SMA for LTE, 2 x RP-SMA for WiFi, 1 x RP-SMA for Bluetooth, 1 x SMA for GNNS
Reset
1 x USB A port for external devices
Other
Reboot/User default reset/Factory reset button
Casing material
1 x Grounding screw
Dimensions (W x H x D)
Full aluminium housing
Weight
132 x 44 x 95 mm
Mounting options
515 g
Operating temperature
DIN rail, wall mount, flat surface (all require additional kit)
Operating humidity
-40 °C to 75 °C
Ingress Protection Rating
10% to 90% non-condensing
Regulatory
IP30
Standards
CE, UKCA, RCM, UCRF, CITC, Kenya, ICASA, ANRT, NTC, SIRIM, GCF, CB, RoHS, REACH
ESD
EN 55032:2015 + A1:2020EN 55035:2017 + A11:2020EN IEC 61000-3-2:2019EN 61000-3-3:2013 + A1:2019EN 301 489-1 V2.2.3EN 301 489-17 V3.2.4Draft EN 301 489-19 V2.2.0Draft EN 301 489-52 V1.1.2
Radiated Immunity
EN 61000-4-2:2009
EFT
EN IEC 61000-4-3:2020
Surge Immunity (AC Mains Power Port)
EN 61000-4-4:2012
CS
EN 61000-4-5:2014 + A1:2017
DIP
EN 61000-4-6:2014
Standards
EN IEC 61000-4-11:2020
Standards
EN 300 328 V2.2.2EN 301 893 V2.1.1EN 300 440 V2.2.1EN 301 908-1 V13.1.1EN 301 908-2 V13.1.1EN 301 908-13 V13.1.1EN 303 413 V1.1.1
The Teltonika RUTX14 4G LTE Cat12 Industrial Cellular Router is designed to meet the demands of various markets that require rugged, reliable products. Below are some of the key industries where the RUTX14 is commonly used:
Aerospace, Marine and Offshore, Medical and Healthcare, Military and Defence, Outdoor and Mobile Computing, Public Safety and Emergency Services, Transport and Logistics
These examples highlight the versatility of the Teltonika RUTX14 4G LTE Cat12 Industrial Cellular Router across a range of market applications, with its potential extending far beyond the sectors listed here. For more information or to assess if this Cellular Router, Rugged Router fits your specific needs, please contact us.
The Teltonika RUTX14 4G LTE Cat12 Industrial Cellular Router comes with a 24 Month Limited Warrany against defects in workmanship and materials, effective from the date of shipment (unless otherwise agreed in writing).
To receive service under this warranty, the eligible product, Teltonika RUTX14 4G LTE Cat12 Industrial Cellular Router, must be presented to RUGGED in the United Kingdom.
For more information about the Teltonika RUTX14 4G LTE Cat12 Industrial Cellular Router or to arrange repairs and services not covered by the warranty, please visit the warranty section on our website.
Do you need further details about the Teltonika RUTX14 4G LTE Cat12 Industrial Cellular Router or require a custom solution or demonstration?
At FB Peripherals, we recognise that every project has its own unique demands. If you have any questions about the Teltonika RUTX14 or need a custom Cellular Router solution designed specifically for you, our team of technical experts are ready to assist you.
Alternative Products
Discover a range of alternatives that offer comparable features and quality to the product you’re viewing.
Our selection of similar items provides diverse options, allowing you to explore different designs, functionalities, and styles tailored to your preferences. Each product has been carefully chosen to ensure it meets the high standards you expect, enabling you to make a well-informed decision based on your unique requirements.
Browse through our related products and find the perfect match that complements your choice seamlessly.
Having trouble finding what you're looking for?
Selecting the right product for your specific application and environment can be quite challenging. At Rugged, our team of experts is on hand to assist you in making the best choice. Whether you have questions about product specifications or require guidance through our range of solutions, we’re here to help.
With our extensive industry knowledge and commitment to quality, we can ensure you find the ideal solution tailored to your needs.
Frequently Asked Questions
FB Peripherals offers free technical support for the lifetime of products you purchase. This includes help with setup, troubleshooting, and integration. Support is available online or directly from the technical team
A cellular router is a specialised networking device that uses cellular networks (3G, 4G, 5G) to provide internet connectivity in remote or challenging environments where traditional wired connections are impractical. Unlike regular routers, cellular routers are designed to operate reliably in harsh industrial settings, ensuring continuous, secure data transmission. They are essential for mission-critical applications that demand robust, uninterrupted communication. FB Peripherals is a trusted supplier of rugged cellular routers, providing durable solutions tailored for industrial and outdoor use. For more information on these devices, visit FB Peripherals’ rugged routers.
Cellular router reliability depends on factors such as network coverage, router quality, and environmental conditions. High-quality cellular routers, especially rugged models designed for industrial use, offer robust connections with minimal downtime, even in harsh conditions. They provide failover capabilities, automatic reconnection, and support for multiple carriers to enhance reliability. For mission-critical applications, choosing a reliable rugged cellular router from a trusted supplier like FB Peripherals ensures consistent performance and stable connectivity in demanding environments.
Dual-Sim failover in a cellular router refers to the capability of the device to switch automatically between two SIM cards to ensure continuous network connectivity. This feature is crucial in mission-critical and harsh environments, where network reliability is paramount. When the primary SIM experiences signal loss or network failure, the router seamlessly switches to the secondary SIM, maintaining uninterrupted data transmission. FB Peripherals offers robust Dual Sim Cellular Routers designed for industrial applications, guaranteeing resilient and secure communication even in challenging conditions.
Yes, modern cellular routers support 5G technology, offering significantly enhanced speed, lower latency, and improved reliability compared to previous generations. These 5G cellular routers are designed to meet the demands of rugged and mission-critical environments, ensuring seamless connectivity even in harsh conditions. For industrial and outdoor applications requiring robust, high-performance networking, 5G cellular routers provide an ideal solution. FB Peripherals specialises in supplying rugged routers built to withstand challenging environments, making them a trusted source for advanced 5G cellular router technology. Learn more about our range of rugged routers designed for 5G connectivity.
Yes, managed cellular routers can be remotely managed, offering significant advantages for industrial and mission-critical applications. Remote management enables real-time monitoring, configuration, and troubleshooting without the need for on-site visits, reducing operational downtime and maintenance costs. These routers support secure VPN access, firmware updates, and performance analytics, ensuring reliable connectivity in harsh environments. FB Peripherals provides a range of rugged, managed cellular routers designed specifically for remote management, ideal for industries requiring robust, uninterrupted network access. For more details on reliable solutions, visit our rugged routers page.
Industrial cellular routers are designed for durability and long-term operation in harsh environments, typically offering a lifespan of 7 to 10 years. This longevity is achieved through rugged construction, high-quality components, and robust firmware that withstands extreme temperatures, vibrations, and electrical interference. Choosing reliable routers from a trusted supplier like FB Peripherals ensures optimal performance and extended operational life in mission-critical applications. Regular maintenance and firmware updates can also help maximise the industrial router lifespan.
Yes, multi-device cellular routers are specifically designed to support multiple devices simultaneously, making them ideal for industrial and mission-critical applications. These routers provide robust, secure connectivity to several endpoints via cellular networks, ensuring reliable data transmission even in harsh environments. FB Peripherals offers a range of rugged multi-device cellular routers engineered for scalability and durability. Their solutions support seamless integration and maintain high performance across multiple connected devices. For reliable, industrial-grade connectivity, explore the options available from FB Peripherals at rugged routers.
Yes, cellular routers generally support VPNs, enabling secure and encrypted connections over mobile networks. This is particularly vital in harsh or mission-critical environments where data integrity and privacy are paramount. Industrial-grade cellular routers from trusted suppliers like FB Peripherals often include built-in VPN capabilities or support third-party VPN software, ensuring robust security for remote monitoring and control applications. To explore reliable options tailored for demanding conditions, visit FB Peripherals’ rugged routers selection. These products combine cellular connectivity with comprehensive VPN support for secure, resilient network solutions.